4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Dilog DL6799 CombiVolt5 True RMS Voltage, Continuity & Current Tester With G38 Probe Tips, LED Flashlight & Carry Case
DL6799
1 in stock for next day delivery see cut off times
10 in stock for 2-3 day delivery see more info
£127.62
inc Vat
£106.35
ex Vat
Free delivery for orders over £100 ex VAT
Dilog DL6799 CombiVolt5 is a five-in-one tester with a rugged, ergonomically formed housing for perfect handling.
It has a fixed jaw clamp that can measure AC/DC current from 0 to 200A whilst the two pole voltage test function can detect AC voltages from 1mV to 750V and DC voltages from 1mV to 1000V. The tester is also capable of performing non-contact and single-pole phase testing in addition to continuity testing, phase rotation testing, capacitance measurement up to 60mF and resistance measurement up to 60M ohms.
The function is selected using the Dilog DL6799's clearly labelled dial whilst other aspects are controlled though push buttons. Readings are shown on the tester's backlit digital display and there is a relative mode as well as data hold which freezes a reading on screen.
Additionally, a bright LED torch is incorporated into the clamp so the user can illuminate the measurement area whenever necessary.
The tester has GS38 shrouded probe tips and fully conforms to BS EN 61010-1, 61010-2-032, CAT II 1000V & CAT III 600V
It has a fixed jaw clamp that can measure AC/DC current from 0 to 200A whilst the two pole voltage test function can detect AC voltages from 1mV to 750V and DC voltages from 1mV to 1000V. The tester is also capable of performing non-contact and single-pole phase testing in addition to continuity testing, phase rotation testing, capacitance measurement up to 60mF and resistance measurement up to 60M ohms.
The function is selected using the Dilog DL6799's clearly labelled dial whilst other aspects are controlled though push buttons. Readings are shown on the tester's backlit digital display and there is a relative mode as well as data hold which freezes a reading on screen.
Additionally, a bright LED torch is incorporated into the clamp so the user can illuminate the measurement area whenever necessary.
The tester has GS38 shrouded probe tips and fully conforms to BS EN 61010-1, 61010-2-032, CAT II 1000V & CAT III 600V
Description
• Meets safety and performance requirements of BS EN 61010-1
• 750V TRMS AC / 1000V DC voltage measurement
• Single Pole Voltage Detection
• Non-Contact Voltage Detector
• Phase rotation test system
• Single pole phase indication
• 200A TRMS AC /DC Current measurement
• 60M Ohm Resistance with Audible Continuity
• Capacitance
• GS38 shrouded probe tips
• Bright LED Flashlight
• Carry Case
Technical Specification
| AC Voltage TrueRMS | 0-750V AC |
| Typical Accuracy | +/- 1.2 % + 3 digits |
| Frequency | 45 - 400Hz |
| DC Voltage | 0 - 1000V DC |
| Typical Accuracy | +/- 0.8 % + 3 digits |
| Single Pole Indication | >100Vrms |
| Non-contact Voltage Detection | >100Vrms Distance <10mm |
| AC Current | 200A |
| Typical Accuracy | +/- 2.5 % + 5 digits |
| Frequency | 50 - 60Hz |
| DC Current | 200A |
| Typical Accuracy | +/- 1.0 % + 2 digits |
| Continuity | 0-600Ω Audible <100Ohms |
| Resistance | 0.1 - 60MΩ |
| Capacitance | 60.00nF - 60.00mF |
| Diode | 6.000V |
| Power supply | 2 x 1.5 V (AA) LR06 batteries |
| Dimensions | 210 x 53 x 35 mm |
| Weight | 164g (batteries Included) |
Technical Information
| Measured Current | AC/DC |
| Measuring Range | AC Voltage TrueRMS Frequency DC Voltage AC/DC Current Continuity Resistance Capacitance |
| Measuring Accuracy | ±1.0% % |
| Minimum Storage Temperature | -20 Degrees C |
| Maximum Storage Temperature | 60 Degrees C |
| Maximum Operational Humidity | 80 % |
| Ean Code | 5060082543456 |
| Product | Tester |
| Type | Multi Function |
| Length | 210 mm |
| Unit Weight | 0.1637 kg |
| Width | 53 mm |
| Standards | EN 61010-1 EN 61010-2-032 EN 61010-2-33 EN 61010-031 EN 61326-1 EN 61326-2-2 |
| Included Accessories | 1.5 V batteries Carry Holster |
| Volts | 1000 V |
| Height | 35 mm |
| Measuring Frequency | 45 | 400 Hz |
| Measuring Voltage | 1000 V |
| Minimum Operating Temperature | 0 Degrees C |
| Maximum Operating Temperature | 50 Degrees C |
Delivery
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.
Reviews