Heatrae Sadia 95.010.282 Streamline 7/3HO White Undersink Vented Water Heater 7 Litres 3.0kW 240V

Features:

• Choice of 7 or 10 litre capacities.
• White case with grey spout and flow control.
• Compact, low profile.
• 1kW or 3kW rating.
• Choice of 15 vented taps, spouts and mixers.
• Easy access for maintenance.
• Externally adjustable thermostat from 5°C to 90°C.
• 5°C to 70°C temperature lock for hand-wash applications.
• Dry start cut-out.
• Anti-frost protection.
• Long-life alloy sheathed element.
• Two year guarantee with on-site service support.

 

Specification:
Capacities: 7 and 10 litre.
Rating: 1kW, 3kW @ 240V, (0.9kW, 2.8kW @ 230V).
Outer casing: White moulded thermoplastic.
Thermal insulation: CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
Water container: Polypropylene, tested to 0.5 bar (7psi).
Heat unit: Rod-type alloy sheathed element.
Thermostat: Capillary-type, externally adjustable from 5°C to 70°C.
Safety features: Dry start cut-out. Frost protection thermostat setting.
Thermostat setting lockable at 40°C for hand washing.
Approvals: BEAB and Kiwa approved to UK Water Supply Regulations. CE marked.
Manufactured in the UK in a BS EN ISO 9001:2008 registered factory.

Installation:
Fixing: Bracket, screws and plugs supplied for wall-mounting.
Plumbing: All installations should be fitted with a service valve to facilitate maintenance (not supplied). Minimum inlet pressure should be 0.34 bar (5psi) at which maximum flow is 5 litres/min. A flow restrictor (available as an accessory) should be fitted for inlet pressures above 0.69 bar (10psi) to limit flow to 7 litres/min. Supply direct from rising main or cistern (minimum head 4m) using 15mm O/D pipe. Cistern supply is not possible for all outlet types; consult Heatrae Sadia for further advice.
NOTE: Only Heatrae Sadia vented taps must be used with Streamline heaters. Electrical Cable entry at rear or base of unit for oversink installations and at rear or top for undersink installations. Must be permanently connected to the electrical supply through a double-pole linked isolating switch with a minimum rating of 13A (3kW model) or 5A (1kW model).
Must conform to current IEE wiring regulations.

 

Dimensions:

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.

Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.