Ansell APRILED/WW Downlights £7.99 
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Heatrae Sadia 95.010.280 Streamline White Thermoplastic Vented Point-Of-Use Undersink Water Heater With Externally Adjustable Thermostat 7Ltrs 1kW
95.010.280
Heatrae Sadia Streamline 7 (Order Code 95.010.280) undersink vented point of use hot water heater to be used in conjunction with Heatrae Sadia's open vented tap range. An attractive, thermoplastic, point of use product offering remarkable versatility, this Streamline model has a 7 litre capacity is rated at 1kW.
Capacities
7 and 10 litre.
Rating
1kW, 3kW @ 240V, (0.9kW, 2.8kW @ 230V).
Outer casing
White moulded thermoplastic.
Thermal insulation
CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
Water container
Polypropylene, tested to 0.5 bar (7psi).
Heat unit
Rod-type alloy sheathed element.
Thermostat
Capillary-type, externally adjustable from 5°C to 70°C.
Safety features
Dry start cut-out. Frost protection thermostat setting.
Thermostat setting lockable at 40°C for hand washing.
Approvals
BEAB and Kiwa approved to UK Water Supply Regulations. CE marked.
Manufactured in the UK in a BS EN ISO 9001:2008 registered factory.
Fixing
Bracket, screws and plugs supplied for wall-mounting.
Plumbing
All installations should be fitted with a service valve to facilitate maintenance (not supplied). Minimum inlet pressure should be 0.34 bar (5psi) at which maximum flow is 5 litres/min. A flow restrictor (available as an accessory) should be fitted for inlet pressures above 0.69 bar (10psi) to limit flow to 7 litres/min.
Supply direct from rising main or cistern (minimum head 4m) using 15mm O/D pipe. Cistern supply is not possible for all outlet types; consult Heatrae Sadia for further advice.
NOTE: Only Heatrae Sadia vented taps must be used with Streamline heaters.
Electrical
Cable entry at rear or base of unit for oversink installations and at rear or top for undersink installations. Must be permanently connected to the electrical supply through a double-pole linked isolating switch with a minimum rating of 13A (3kW model) or 5A (1kW model).
Must conform to current IEE wiring regulations.
| Range | Heatrae Streamline |
| Product | Water Heating |
| Type | Vented Undersink |
| Wattage | 1.0 kW |
| Colour | White |
| Output | 1.0 kW |
| Capacity | 7 Litres |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.49 ex-VAT.
Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 25 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.
Stock Availability and Delivery
In-stock items for delivery to you within 1-2 working days. We will contact you if we do not have all of your items in stock.
Items kept in our remote warehouse or ordered from the supplier. We will advise you if it will take any longer than the typical 2-4 working days.