Zip Water AP3/15 Aquapoint III White Multipoint Unvented Water Heater With Pressure Release Valve 15 Litres 2.2kW 240V
AP3/15
Zip Aquapoint III is an unvented Water Heater. It is available in 5, 10 and 15 litre models. It has a glass lined steel storage tank tested to 12 bar and a sacrificial anode is fitted for protection against aggressive water conditions.
Features
• Hot water for one or more outlets
• Used with conventional taps or mixers
• Glass lined steel storage tank tested to 12 bar
• Sacrificial anode for protection against corrosion
• Element 'ON' neon indicator
• External temperature control with frost protection
Â
Specification
• Unvented, multipoint water heater
• Hot water storage tank of 1.8mm thick glass enamelled steel tested to 12 bar. 2.0 kW heating element
• Fitted with a sacrificial anode. Adjustable thermostat with a range up to 75°C
• Fitted with frost protection
• Resettable over temperature safety cut out
• Factory fitted pressure and temperature relief valve
• Element 'ON' neon indicator
• High density CFC-free polyurethane foam insulation
• Corrosion resistant white plastic case
• BSP water connections
• Supplied with installation kit
• Capacity: 5 litres, 10 litres, 15 litres
• Rating: 2.0kW
• Heating Element: Embedded rod type
• Thermostat: Capillary type adjustable up to 7°C to 75°C
• Water tank: 1.8mm glass enamelled, steel tested to 12 bar, with a working pressure of 3.5-4 bar
• Case: High impact and corrosion resistant white plastic
• Insulation: High density, CFC-free polyurethane foam
• Safety Features:
(a) manually resettable thermal cutout set to 85°C +/- 3°C
(b) expansion relief valve (supplied) set at 6 bar
(c) protected against frost whilst power is on
(d) sacrificial anode for added protection against corrosion for element and tank - must be checked regularly (6 months) and replaced where necessary as gradual erosion will occur. In extreme cases local water conditions can cause rapid erosion of the anode resulting in particles being deposited as a residue The Aquapoint should not be used where water quality is critical
• Approvals: WRAS approved and CE endorsed
• Warranty 12 months
Â
Dimensions
Dimensions(mm) | Weight (kg) | |||||
H | W | D | Empty | Full | ||
AP3/05 | 5 Litres | 376 | 256 | 260 | 6.7 | 12.7 |
AP3/10 | 10 Litres | 480 | 350 | 265 | 8.5 | 18.5 |
AP3/15 | 15 Litres | 480 | 350 | 310 | 9.8 | 24.8 |
Installation
Location
• The water heaters should be installed on the floor, provided connections are at the top
• All models can supply one outlet or multiple outlets with no special taps required
• When deciding the final location of the heater, consideration should be given to the safe and visible disposal of any water resulting from leaks or seepage. This is particularly relevant when the heater is located in a roof space, cupboard or any concealed location
Plumbing
• Water connections 15mm BSP
• Minimum recommended water pressure 1 bar
• Pressure relief valve set at 6 bar
• Pressure and temperature relief valve, where fitted requires plumbing to waste in accordance with water byelaws
Electrical
• To be wired to a double pole fused spur, minimum break rating 13 amps
• Installation must comply with current IEE regulations
Caution
Variable temperature water heaters should be set only in strict compliance with regulations governing the temperature of stored and dispensed hot water
Â
Typical Installation
Ean Code | 5036764323036 |
Range | Zip Water Aquapoint |
Product | Water Heating |
Type | Unvented Undersink |
Wattage | 2200 W |
Colour | White |
Voltage | 230/240 V |
Warranty | 1 Years |
Use | Domestic |
Width | 350 mm |
Depth | 310 mm |
Electrical Supply Current Rating | 13 A |
Overall Height | 480 mm |
Thermal Insulation | Flame Retartdant Polyurethane |
Standards | WRAS |
Qualifier | Plastic |
Vented | N |
Thermostat Range | 7 to 75 Degrees C |
Re-settable Temperature Cut-out | Y |
Plumbing Connection Sizes | 15 mm |
Electrical Supply Switch Type | Double Pole Fused Spur |
Ce Approved | Y |
Water Available | Point of Use |
Capacity | 15 Litres |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.49 ex-VAT.
Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 25 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.
Stock Availability and Delivery
In-stock items for delivery to you within 1-2 working days. We will contact you if we do not have all of your items in stock.
Items kept in our remote warehouse or ordered from the supplier. We will advise you if it will take any longer than the typical 2-4 working days.