Heatrae Sadia 95.970.352 Pack U1 Combined Pressure Reducing Valve & Strainer For Hotflo & Multipoint 10/15 Unvented Water Heaters

The Pressure Reducing Valve limits water pressure to 3.5 bar (50psi).

The Strainer filters coarse impurities from the water supply.

Connection ½" BSP female.

Installation Pack U1 must be installed on the cold inlet side of the heater and before the expansion vessel. Where possible, installation should be on the mains side of the cold water tap draw-off. This will result in balanced water supplies and is particularly important when mixers are to be used.

Where Pack U1 is fitted with a Hotflo, it must be used with Pack U5

C/w Humidistat	N
C/w Pullcord	N
Ean Code	5012496703520
Thread Standard	Internal
End Type	Female Ends
Number Of Ports	2
Principle Operation	Limits water pressure to 3.5 bar (50 psi)
Flanged	N
Angled/straight	Straight
Gasket Included	N
Handle Included	N
Gauge Included	N
Maximum Pressure (bar)	3.5 Bar
Product	Water Heating Accessory
Type	Pressure Reducing Valve
Use	Domestic & Commercial
Body Material	Brass

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.49 ex-VAT.

Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 25 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.

Stock Availability and Delivery

In-stock items for delivery to you within 1-2 working days. We will contact you if we do not have all of your items in stock.

Items kept in our remote warehouse or ordered from the supplier. We will advise you if it will take any longer than the typical 2-4 working days.