4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Heatrae Sadia 95.050.149 Hotflo White Steel Unvented Water Heater With Externally Adjustable Thermostat 15Ltrs 2.2kW 240V
95.050.149
The Hotflo 15 unvented point of use hot water heater can service up to three basins and has a copper inner container, requiring no anode, to achieve optimum performance in terms of durability and corrosion-resistance.
Features
• Available in 10 litre (suitable for up to two basins) and 15 litre (suitable for up to three basins) capacities.*
• 2.2kW element rating.
• Replaceable copper inner container with integral heating element.
• Two year guarantee with on-site service support.
• Externally adjustable thermostat from 10°C to 70°C.
• CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
• Element ‘On' indicator.
• No anode to inspect or replace.
• Suitable for use with any standard tap or mixer.
• Fitted with 1 metre of 3-core cable.
• Comprehensive installation instructions.
• Pressure relief valve supplied with all models.
• IPX4 rated.
• Kiwa approved to UK Water Supply Regulations. CE marked.
* Figures are for guidance only, the Heatrae Sadia Specification Advice Team should be contacted to discuss requirements for specific sites. Capacity recommendations are based on BS 6700.
Specification
Capacities:
10 and 15 litres.
Rating:
2.2kW @ 240V, (2kW @ 230V).
Outer casing:
White plastic top moulding with steel base and centre section, finished in white stove enamel.
Thermal insulation:
CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
Water container/integral heat unit:
Replaceable heavy gauge copper inner container, designed for 6 bar working pressure and type tested to 20 bar (290 psi), with embedded rod-type element sheathed in corrosion resistant alloy.
Thermostat:
Rod-type externally adjustable from 10°C to 70°C.
Safety features:
Pressure relief valve set to open at 6 bar.
Resettable over temperature cut-out.
Anode:
Not required.
IPX4 rated
Approvals:
Kiwa approved to UK water supply regulations.
CE marked. Manufactured in the UK in a BS EN ISO 9001:2000 registered factory.
| Ean Code | 5012496501492 |
| Range | Heatrae Hotflo |
| Product | Water Heating |
| Type | Unvented Undersink |
| Wattage | 2200 W |
| Colour | White Stove Enamel |
| Voltage | 230/240 V |
| Warranty | 2 Years |
| Use | Domestic |
| Width | 252 mm |
| Depth | 267 mm |
| Fixing Method | 3 Screw/Keyhole Slot |
| Electrical Supply Current Rating | 13 A |
| Overall Height | 656 mm |
| Unit Weight (empty) | 8.4 kg |
| Unit Weight (full) | 23.4 kg |
| Container Height | 613 mm |
| Standards | BS EN ISO 9001 |
| Vented | N |
| Thermostat Range | 10 to 70 Degrees C |
| Re-settable Temperature Cut-out | Y |
| Plumbing Connection Sizes | 15 mm |
| Electrical Supply Switch Type | Double-Pole Linked Switch |
| Ce Approved | Y |
| Water Container Material | Heavy Gauge Copper |
| Water Available | Point of Use |
| Capacity | 15 Litres |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.