4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Zip Water AP3/05/OB Aquapoint III White Multipoint Unvented Oversink Water Heater With Pressure Release Valve 5Ltrs 2.2kW
AP3/05/OB
Zip Aquapoint III is an unvented Water Heater. It is available in 5, 10 and 15 litre models capacity to serve single or multiple hot water outlets. It has a glass lined steel storage tank tested to 12 bar and a sacrificial anode is fitted for protection against aggressive water conditions. All Zip Aquapoint III water heaters come with all the necessary accessories and factory fitted P&T valve. Zip Aquapoint III Water Heaters are a favourite choice of supplying hot water within a domestic or commercial environment.
• Heating element - Embedded rod type.
• Thermostat - Capillary type adjustable up to 7ºC to 75ºC.
• Water tank - 1.8mm glass enamelled, steel tested to 12 bar, with a working pressure of 3.5-4 bar.
• Case - High impact and corrosion resistant white plastic.
• Insulation - High density, CFC-free polyurethane foam.
• IP Rating - IP24
• Approvals - WRAS approved and CE endorsed
Safety features
a) manually resettable thermal cutout set to 85ºC +/– 3ºC.
b) expansion relief valve (supplied) set at 6 bar.
c) protected against frost whilst power is on.
d) sacrificial anode for added protection against corrosion for element and tank – must be checked regularly (6 months) and replaced where necessary as gradual erosion will occur.
In extreme cases local water conditions can cause rapid erosion of the anode resulting in particles being deposited as a residue.
The Aquapoint should not be used where water quality is critical.
Warranty
One-year on site parts and labour
Installation
Separate models available for oversink and undersink installation.
All models can be wall mounted.
Undersink units can be installed unsupported on the floor if required.
All models can supply one outlet or multiple outlets, subject to capacity, without the need for special taps.
Plumbing
Water connections ½ / 15mm BSP.
Minimum recommended water pressure 1 bar.
Pressure relief valve (supplied) set at 6 bar.
Pressure and temperature relief valve requires plumbing to waste in accordance with water byelaws.
Should be installed only by a suitably experienced installer of unvented electric storage water heaters.
Oversink and undersink models not interchangeable
Electrical
To be wired to a double pole fused spur
| Range | Zip Water Aquapoint |
| Product | Water Heating |
| Type | Unvented Oversink |
| Wattage | 2.2 kW |
| Colour | White |
| Output | 2.2 kW |
| Capacity | 5 Litres |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.