4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Eaton MEM 100AXD2 Exel2 Grey Three Phase DP Switch Disconnector 100A 415V
100AXD2
Exel 2 switch-disconnectors & switch-disconnector fuses
Exel 2 switch disconnectors and switch-disconnector fuses meet the constructional requirements for isolation of and are type tested to BS EN 60947-3. Switches are of the quick make and break type, suitable for use on AC or DC. Units have removable moving contract assemblies to facilitate wiring. Exel 2 surface-mounting enclosures are fabricated from rust-protected sheet steel with a light grey paint finish. Removable blank top and bottom end plates (except for 20 and 32A top end plates which incorporate knockouts) and gasket doors give IP41 protection. Chromium plated front operated handles with "ON (I) OFF (O)" indication, and internal fixing enabling units to be moutned closely side by side. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
HRC fuse carriers are designed for offset contact fuse links to BS 88: Part 2. Eaton HRC fuse links fitted to switchdisconnector- fuses are suitable on systems up to 415V AC. Eaton fuses used in these products are also suitable for 250V DC systems. All performance tests have been carried out using Eaton BS88 fuse links. Units are fitted with HRC fuselinks of maximu rating but will accept fuselinks of a lower rating.
The motor ratings assigned to TPN switch-disconnector units are utilisation category AC23A (frequent operation) to BS EN 60947-3, whixh calls for make and break testing at 10 and 8 times rated current respectively for units having a motor rating up to and including 100 Amps. Ratings for switch-disconnector-fuses are dependent on suitable HRC fuses being fitted.
Maximum cable sizes are: 20A-6mm², 32A-10mm², 63A-35mm², 100/125A-70mm².
This range has been satisfactorily type tested in accordance with BS EN 60947-3 with Eaton HRC fuselinks fitted.
| Ean Code | 5019586012074 |
| Range | Eaton Exel2 |
| Product | Switch Fuses & Disconnectors |
| Type | Switch Disconnector |
| Ingress Protection | IP41 |
| Length | 329 mm |
| Voltage | 415 V |
| Pole Configuration | Double Pole (2P) |
| Material | Sheet Steel |
| Width | 367 mm |
| Depth | 210 mm |
| Current Rating | 100A |
| Finish | Painted |
| Standards | BS EN 60947-3 |
| Number Of Poles | Double Pole (2P) |
| Mounting Type | Surface |
| Voltage Rating | 415 V |
| Rated Current | 100 A |
| Breaking Current | 80 kA |
| Rated Short Circuit Withstand Current | 1s for 3750A rms kA |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.