4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Klik KLDS6 Lighting Distribution Marshalling Box 6 Outlets
KLDS6
Klik KLDS6 Lighting Distribution box is pure common sense.
It is the logical development of the highly successful secure connector system. Klik KLDS now makes a time consuming job very simple and very fast.
• Complies with BS5733
• Main terminal capacity 5 x 4mm²
• Flexible conductor terminal capacity 1 x 1mm²
• Main terminals rated 16 Amps. Each socket outlet rated 6 Amps. Flexible conductor terminals rated at 10 Amps.
• All socket outlets factory connected and tested
• Aluminium extruded body
• All plastic 'V0' rated
• Socket outlets accept Klik lighting (3 pin) plugs and Klik AX (4 pin) plugs and Klik pre-wired leads
• Cable entries will accept 20mm or 25mm conduit
• Self-retained cover screws
Features & Benefits
|
Klik LDS can be hung from the ceiling suspension system via drop rods and Caddy Clips |
|
|
Compact dimensions allow for installation in confined ceiling voids. Terminal cover slides off from the front facilitating Klik LDS usage in confined spaces |
|
|
Klik LDS can be fixed direct to ceiling or wall with No. 8 screws. |
|
|
Each socket outlet will accept 3 or 4 pin plugs |
|
|
Single or dual switching capability is selected via a copper link. Use of this link will switch all outlets as one circuit or remove it to control two lighting circuits from on Klik LDS unit. |
Moulded parts are manufactured from PC-ABS, which is a low smoke and fume material and provides a "halogen free" product.
A separate terminal block is provided for connection of flexible cords. Large barriers between terminals provide improved segregation
Clear circuit and terminal identification simplifies the installation process.
Overview
The Klik Connector System, simply brings plug-in convenience and versatility for lighting.
It is a unique modular plug and socket interface that provides simultaneous mechanical and electrical connection in one click-in action.
Luminaires can be plugged in, in seconds, in absolute safety, without circuit isolation. All live contacts are inaccessible and the earthing connection is made before any other.
The non wander design prevents disconnection of the plug from its socket by vibration or snatch withdrawals. Strong load grips provide support for luminaires up to 10kg, so all types and sizes of luminaires can be safely used.
The electrical connection is made by latch contacts perpendicular to the natural load direction, thus eliminating strain on the contacts. Klik exceeds the relevant British Standard requirements and enables compliance with IEE Wiring Regulations and Safety Regulations.
| Ean Code | 5015654770198 |
| Range | Hager Klik |
| Product | Mounting Box |
| Type | Lighting Connector |
| Colour | White |
| Length | 288 mm |
| Number Of Gangs | 6 |
| Voltage | 230 V |
| Number Of Entries | 6 |
| Material | Aluminium |
| Current Rating | 6 A |
| Standards | BS 5733 |
| Height | 222 mm |
| Nominal Width | 73 mm |
| Ways | 6 Way |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.