4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Zip Water ES4 InLine 4.4kW Instantaneous water heater white
ES4
The Zip ES4 is an InLine 4.4kW White Compact Electronic Instantaneous Water Heater For Handwash Applications.
Features:
• Unlimited hot water supply for handwashing
• Smart, compact design
• Heats only the water drawn drawn off - no standing heat loss
• Stainless steel bare wire heating element for fast heat up
• Flow rate of 1.7 - 3.3 litres per minute
• Electronic power control adjusts to compensate for inlet pressure and temperature variations
• Double pole thermal cut-out protection
• For use only with taps with removable M22/M24 nozzles
Â
• Heating system - Bare-wire heating system for fast response.
• Safety feature - Water temperature electronically controlled to maintain factory setting of 38°C.
• IP rating - IP 24.
• Case - Impact resistant plastic.
• Approvals - WRAS, VDE, CE endorsed.
• Temperature setting - Temperature and flow adjustable at time of installation.
• Taps - For correct operation it is essential that the special tap nozzle supplied is fitted to the tap spout. Nozzles supplied to suit M22/24 taps should be used.
• Warranty - One-year on site parts and labour.
• Location - The appliance must be installed in a frost free environment. Zip ES products comply with IP24 and may be installed in zone 1. The unit should be installed as close as possible to the outlet to avoid heat loss
Plumbing
• The appliance is intended for connection to the mains water supply.
• The appliance may be used as an unvented installation (as shown in the diagram below) or as a vented installation as described in the fitting instructions.
Electrical
• The appliance must be earthed and connected to the mains supply by means of permanent wiring through suitable isolation having a contact separation of 3mm in all poles and may only be operated if measures have been taken to protect against shock-hazard voltages.
• Installation must be installed in accordance with current IEE regulations
Â
Dimensions:
| Model | ES3 | ES4 | ES6 |
| Pressure Rating | 10 bar | ||
| Element Type | Bare Wire | ||
| Supply Voltage (V) | 240V | ||
| Nominal Power Rating @ 240V (kW) | 3.1kW | 4.8kW | 6.0kW |
| Nominal Current @ 240V (A) | 13A | 20A | 25A |
| Temperature Adjustment (Installer) | 30°C - 50°C | ||
| Maximum Inlet Temperature | 30°C | ||
| Factory Set Temperature | 38°C | ||
| Maximum Temperature Increase @ 240V and a flow rate of : | |||
| 2.0 litres/min | 22°C | 34°C | 43°C |
| 2.5 litres/min | 18°C | 27°C | 34°C |
| 3.0 litres/min | 15°C | 23°C | 29°C |
| 3.5 litres/min | 13°C | 20°C | 24°C |
| 4.0 litres/min | 11°C | 17°C | 21°C |
| Switch On Flow Rate (litres/min) | 1.2 | 1.5 | 1.5 |
| Switch Off Flow Rate (litres/min) | 1.0 | 1.3 | 1.3 |
| Required Specific Water Resistance @ 15°C | >1300 ohm.cm | >1000 ohm.cm | >1000 ohm.cm |
| Capacity (Litres) | 0.2 | ||
| Filled Weight (kg) | 1.5 | ||
| Water Connections | ½" BSP | ||
| Dimensions H x W x D (mm) | 132 x 187 x 80 | ||
| Protection Class (IEC 529) | IP24 | ||
| Capacity (l) | 0.2 Litres |
| C/w Humidistat | N |
| C/w Pullcord | N |
| Ean Code | 5036764424085 |
| Range | Zip Water ES InLine |
| Product | Water Heating |
| Type | Undersink |
| Wattage | 4.4 kW |
| Colour | White |
| Voltage | 230/240 V |
| Warranty | 1 Years |
| Mounting | Surface |
| Use | Domestic |
| Width | 187 mm |
| Depth | 80 mm |
| Overall Height | 132 mm |
| Standards | WRAS |
| Qualifier | Compact |
| Nominal Power Output | 4.4 kW |
| Flow Resctrictor | Y |
| Ce Approved | Y |
| Water Available | Instantaneous |
| Capacity | 0.2 Litres |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.
