4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Hyco Manufacturing IN96T Aquila White Instantaneous In-Line Water Heater With Thermostat For Handwash Applications 5.2Ltrs/min 9.6kW
IN96T
This thermostatically controlled instantaneous water heater is suitable for hand washing at up to 2 basins, or for a single light shower, or light dishwashing at a single sink. Confirm that the flow rate and temperature performance is adequate for your application using the chart and tables provided.
Outer Casing
Easy clean high impact ABS
Heating Element
Bare-wire heating system (2 nickel chrome heating elements)
Control Screen (from left to right)
Temperature display (°C).
Actual flow rate display (l/m)
Heating power display (%)
Memory – save selected temperature.
Touch screen arrow keys allow the user to set the required temperature.
Touch screen power on/off control.
The temperature display will flash if the set temperature cannot be reached.
Flow Dial
Increase/decrease maximum water flow rate.
Safety
Overheat temperature protection 75°C (manual reset).
Water temperature electronically controlled to maintain user selected temperature between 30°C and 60°C as water pressure conditions vary.
IP Rating
IPX4
Installation
This appliance must be installed in a frost free environment.
The heater should be located as close as practical to the hot water outlet to avoid unnecessary heat losses through the pipework.
Plumbing
Must be installed by a suitably qualified person.
Minimum flow rate 2.5 l/m.
Minimum water pressure 1 bar.
Maximum water pressure 7.5 bar.
Water resistivity = 1300 Ocm.
Water Connection
Inlet/Outlet 2 x 1/2 BSP male (100mm apart centre to centre).
Fittings required (not supplied): 2 x 15mm compression to 1/2" BSP female adapter.
Suitable for use with pre-heated water e.g. solar heating systems subject to maximum inlet water temperature 60°C
Electrical Connection
Installation must comply with current IEE regulations.
Single phase
| Range | Hyco Aquila |
| Product | Water Heating |
| Type | Oversink |
| Wattage | 9.6 kW |
| Colour | White |
| Output | 9.6 kW |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.