Santon 94.050.211 PowerPack White Moulded ABS Compact Instantaneous Water Heater 7kW 240V

Controls
A pre-set safety cut-out set at 88°C (190°F) prevents overheating should abnormal conditions arise.
Casing
Moulded from white ABS.
Inner Container
Glass reinforced plastic cylinder, complete with inlet/outlet connections and element. A drain plug is fitted to drain the container to prevent freezing if left in winter.
Fittings
A pressure relief valve set to relieve at 10 bar is provided together with a tee-piece which must be fitted on the heater outlet pipework. This valve MUST be connected to waste (drain) via a tundish and the drain pipe should fall continuously and be of 22mm bore discharging in a safe visible manner. The pipe must not be reduced in bore or blocked under any circumstances and it should be protected from frost.
Pressure Range
Min: 1 bar.
Max: 7 bar.
Connections
1/2” BSP inlet and outlet.
Approvals
BEAB and kiwa approved.
CE marked.
Guarantee
Two years.
Full details are contained within the installation instructions supplied with each unit.

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.

Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.