Hyco Manufacturing IN44T Rho White Compact Instantaneous In-Line Water Heater With Thermostat For Handwash Applications 2.4Ltrs/min 4.4kW

Outer Casing
Easy clean high impact ABS

Heating Element
Bare-wire heating system (3 nickel chrome heating elements)

Controls (Thermostatic Model only)
Temperature display (°C)

Power on/off button

+/- controls allow the user to set the required temperature

The temperature display will flash if the set temperature cannot be reached.

Taps and Tap Spray Nozzles
Intended for use with spray head taps with removable M22/M24 nozzles. Compatible taps available.

Important – the supplied tap spray nozzle must be fitted in the tap for best performance. 4.4 kW: 2.0 l/m, 6.0 kW: 2.5 l/m, other flow rates available on request.

Safety
Overheat temperature protection 80°C.

Thermostatic model – water temperature controlled to maintain user selected temperature between 30°C and 48°C as water pressure conditions vary.

IP Rating
IPX4

Installation
This appliance must be installed in a frost free environment.

The heater should be located as close as practical to the hot water outlet to avoid unnecessary heat losses through the pipework.

Plumbing
Must be installed by a suitably qualified person.

Minimum flow rate 2.0 l/m.
Minimum water pressure 1 bar.
Maximum rated pressure 7.5 bar.
Water resistivity = 1300 Ocm.

Water Connection
Inlet/Outlet 2 x 1/2 BSP male (40mm apart centre to centre).
Fittings required (not supplied): 2 x 15mm compression to 1/2" BSP female adapter.

Suitable for use with pre-heated water e.g. solar heating systems subject to maximum inlet water temperature 60°C.

Electrical Connection
Installation must comply with current IEE regulations.

Single phase. Fuse rating guide 19 amps for 4.4 kW and 27 amps for 6.0 kW.

The product should be connected to the fixed wiring of the property via a suitably rated isolating switch with contact separation of at least 3mm in all poles.

Cable pre-wired (0.7m).

Approvals
CE

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.

Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.