4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Hyco Manufacturing Zen SPA3L 2 in 1 Boiling and Chilled Tap with 3 Litre Boiling Water Tank
SPA3L
The Zen Spa is a 2 in 1 hot and cold drinks station. In the office it replaces the traditional need for a wall mounted boiling water unit and separate floor standing chiller. In the home it replaces the need for a kettle and provides high quality cold drinking water.
The Zen Spa can be installed over a sink or with the stylish, tempered glass design Zen Font.
Features
• All of the features and benefits of the Zen Solo plus cold (ambient) or chilled drinking water from a single tap
• Suitable for commercial or domestic applications
• Energy efficient - standing loss only 17 W for 3L boiling tank and 20 W for 6L model
• High flow rate over 3 l/m and high initial capacity makes it quick and easy to use
• Modular solution allows you to tailor the tap to your individual requirements
• Cold (ambient) drinking water models connect directly to the incoming water supply
• Chilled drinking water models include a Sapphire undersink chiller
• Dispensed water temperature can be adjusted down to 98°C on installation if required
• Must be fitted with initial scale filter (F5SST) supplied for inlet to boiling tank and cold drinking water filter
• Available with 3 or 6 litre boiling water tank
• Power rating 1.60 kW for 3 litre model and 2.84 kW for 6 litre model
• Recovery Rate 90 cups/ 60 mugs per hour for 3 litre model and 160 cups/ 107 mugs per hour for 6 litre model based on 167 ml cup and 250 ml mug
Boiling Specification
Outer Casing
Tap - polished chrome finish as standard
Other tap finishes available at additional cost (see Zen Tap Finishes)
Tank - durable high impact PC/ ABS
Water Tank
High quality grade 316L stainless steel
Heating Element
Incoloy
Thermostat
Electronic to control water up to boiling point
Insulation
Highly efficient aerogel thermal insulation
Initial Draw off
3 litre model - 18 cups/ 12 mugs based on 167 ml cup and 250 ml mug.
6 litre model - 36 cups/ 24 mugs based on 167 ml cup and 250 ml mug
Safety
Overheat temperature protection (manual re-set).
Safety lock mechanism.
Supplied expansion vessel and pressure relief valve must be fitted.
IP Rating
IPX1
Installation
This appliance must be installed in a frost free environment.
Required hole diameter for mounting tap 32mm – fits in a standard sink.
Sink/ counter top up to 50mm thick.
The dispensed water temperature can be adjusted down to 98°C on installation if required.
Plumbing
Must be installed by a suitably qualified person.
Intended for connection to the mains water supply.
Minimum water pressure 1 bar.
Maximum water pressure 4.2 bar. If higher than this a pressure reducing valve is required.
Supplied expansion vessel and pressure relief valve must be fitted.
Electrical Connection
Installation must comply with current IET wiring regulations.
Supplied with a pre-wired (1m) BS plug.
Approvals
CE, UKCA
Standard Warranty
2 years parts or replacement warranty. Supplied scale filter must be fitted and changed at least every 6 months otherwise the warranty may be void.
| Range | Hyco Zen Spa |
| Product | Water Heating |
| Type | Hot & Cold Tap |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.