Heatrae Sadia 95.020.115 Handy No Touch Instantaneous Automatic 'No-Touch' Handwash Water Heater 3.1kW 240V

Rating
3.1kW @ 240V (2.9kW @ 230V).

Controls
Handy 3/7 – Single turn rotary control dial for on / off, temperature and flow setting.
Handy No Touch – ‘No touch’ control dial for on / off. Temperature and flow setting via tamper-proof adjuster.

Outer casing
White moulded ABS plastic cover.

Heat unit
Copper sheathed rod-type element.

Water container
Glass reinforced nylon.

Safety features
Self-resetting thermal cut-out set at 52°C for over heat protection. Non self-resetting second stage cut-out set at 92°C. Pressure relief device in the base of the container to prevent high-pressure build-up. Flow / temperature stabiliser maintains consistent outlet temperature under variable water pressure conditions. Pressure sensor cuts off power if flow is inadequate.

Ingress protection
IPX5

Approvals
Handy 3/7 – BEAB and Kiwa approved to UK water supply regulations. CE marked.
Handy No Touch – Kiwa approved to UK water supply regulations. CE marked.

Fixing
Base assembly is secured to wall by two fixing screws, followed by electrical and plumbing connections. The spout and front cover are then attached. Two screws secure the front cover.

Plumbing
15mm female push fit at the base of the unit for bottom or rear (concealed) entry. Incoming feed pressure should be between 0.1Mpa (1 bar-14.5psi) and 0.7Mpa (7 bar-100psi).

Electrical
Cable entry from rear or bottom of unit. Special requirements of the BS 7671 (IEE Wiring Regulations) should be observed when installed in bathrooms. Units must be permanently connected to the electrical supply through a double-pole linked isolating switch. Handy 3 and Handy No Touch can be supplied from a ring final circuit via a fused spur with a double pole linked isolating switch with a 13A minimum breaking capacity.
Cable – 1.5–2.5mm². The 7.2kW Handy requires a dedicated circuit and switch rated at 30A minimum. All electrical work must comply with the latest edition of BS 7671 (IEE Wiring Regulations).

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.

Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.