4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Aico EI413 RadioLink White Panel Interface Module For 2-Way Communication Between Aico Alarms & Panel System
EI413
Range Options
|
EI168RC | Radiolink Base | £49.14 £40.95 |
in cart
|
|
Ei170RF | Vibrating Pad | £190.36 £158.63 |
in cart
|
|
EI407 | Remote Call Point | £38.35 £31.96 |
in cart
|
|
Ei408 | Input Module | £40.54 £33.78 |
in cart
|
|
EI413 | Panel Interface | £52.36 £43.63 |
in cart
|
|
EI414 | Fire & CO2 Interface | £162.72 £135.60 |
in cart
|
|
EI428 | Remote Relay Module | £63.22 £52.68 |
in cart
|
|
EI450 | Control Switch | £54.79 £45.66 |
in cart
|
|
EI630IRF | Heat Alarm, Wireless | £61.39 £51.16 |
in cart
|
|
EI650IRF | Optical Alarm, Wireless | £58.50 £48.75 |
in cart
|
Features
• Creates a two way communication between Aico alarms and a panel system
• Uses RadioLINK wireless interconnection technology to connect with Aico alarms and is hard wired into the Panel system
• Powered directly from the Panel system
Operation
• On receiving a Volt-free switched hardwired signal from the panel, the module will transmit a RadioLINK alarm signal to activate the alarms in the system
• If a fire alarm has activated, the module will recognise the signal as a fire, and switch the relevant contacts to activate the panel
• If a Carbon Monoxide alarm has activated, the module will recognise the signal as a Carbon Monoxide leak and switch the relevant contacts to activate the panel
Technical Spec
Eliminate the need for any cabling between the Ei413 and the smoke/heat/CO alarms used in the system.
The Ei413 is conformant to EN300220-1 (RF Performance) in accordance with EN300220-2 and EN301489-1 (EMC) referencing EN301489-3.
The unit is powered from the alarm panel and requires 11 to 30VDC. Unit current rating: 15mA (Standby), 60mA (Alarm Max).
The unit has three sets (Normally Open, Normally Closed and Common) of built-in wiring contacts for connection to the panel (rated at 30V @1 Amp). On the contacts closing, the unit will (dependant on which set of contacts are connected) indicate a fire, CO leak or fault to the panel. The unit also has a Normally Open volt-free set of contacts to link from the panel to it, so if the panel is activated, the unit will transmit a RadioLINK signal to the alarms in the system to activate them (they will sound).
Radio frequency: 868MHz band in accordance with R&TTE Directive 1999/5/EC – this band has been designed for use with security products and only allows a 1% duty cycle, so continuous transmission and interference from external sources is extremely remote and would be illegal.
Up to 12 RadioLINK units can be used in one system. Range may be a limiting factor.
RF Range: The type of building will be the major limiting factor e.g. the number and type of walls/ceilings that the radio signal has to pass through. As a guide, 30m should be the maximum distance between any of the RadioLINK units in the system.
Designed for surface mounting or can be fitted into certain alarm panels provided the casing is not a metallic construction which may restrict RF signals.
Dimensions: 88mm x 88mm x 28mm.
Weight: 150g.
Ambient Temperature Range: 0°C to 40°C.
5 year guarantee.
| Mounting Method | Surface |
| Minimum Operating Humidity | 15 % |
| Maximum Operating Humidity | 95 % |
| Ean Code | 5099383004748 |
| Range | Aico RadioLINK |
| Product | Module |
| Type | Panel Interface |
| Colour | White |
| Length | 91 mm |
| Warranty | 5 Years |
| Unit Weight | 0.156 kg |
| Mounting | Surface |
| Material | High Impact Polystyrene |
| Width | 91 mm |
| Depth | 52 mm |
| Current Rating | 1 A |
| Standards | EN 300 220-1 / EN 300 220-2 / EN 301 489-1 / EN 301 489-3 |
| Qualifier | Fire |
| C/w Batteries | N |
| Minimum Operating Temperature | -10 Degrees C |
| Maximum Operating Temperature | 40 Degrees C |
| Power Supply Mains | 12-24 V |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.