4.8⭐
Cable & Cable Installations
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment & Lighting
EV Charging
Solar
CP Electronics EBR-HW-AC-ET Area Controller Module in Enclosure Ethernet
EBR-HW-AC-ET
Area Controllers allow all RAPID lighting control modules on a floor to communicate with one another, as well as allowing communication between floors and/ or a computer front end package. It also allows the system to be sub-divided into distinct areas, or zones.
The Area Controller is supplied in a specifically constructed DINrail enclosure which is fixed to the mounting surface using dimpled fixing holes in the rear of the enclosure. The enclosure also has the facility for additional component such as AN-10 gateway and RS232 module for AV or alternative system interface.
Key features:
- Built-in site test keypad with pre-configured test routines including testing of DALI emergency light fittings
- Use IP networks to unify buildings into one management system
- Outputs addressability of up to three field BUS networks for connection of LCMs, hardwired modules, and DALI gateways
- Fitted with DIN rail enclosure which is fixed to the mounting surface
Outputs and Addressability
The RAPID Area Controller has 3 switchable field BUS outputs for connection of floor networks including LCMs, hardwired modules, and DALI gateways. In addition to this there are 3 corresponding RJ45 ports for RAPID field BUS monitoring via the engineer's laptop. There is also TCP/IP addressability via an on board Ethernet Port which allows for connectivity to the building network.
Connectivity
Mains is connected and looped (if required) by the dual Live, Earth, and Neutral terminals. 8 ELV inputs also allow for direct connection of switches to the Area Controller, there is also an integrated volt free output for connection of emergency test or other interfaces.
Timed Events
Built into the new Area Controller is a time scheduler with battery back up to allow for timed events such as local lighting and emergency test schedules. Functions such as emergency lighting test can now be easily implemented via the push buttons and numerical keypad on the front of the Area Controller. Pre-programmed emergency test durations of 3 hours, 1 hour and 10 minutes are available. The numerical keypad allows for a PIN lock as well as three levels of access for an engineer, contractor, or facilities management. There are also status LEDs for each RAPID field BUS network and the backbone network between area controllers.
Programming
An Infra-red programming port is also included to allow for uploading commands via the UNLCDHS with a status LED to confirm receipt of command. The Infra-Red (IR) port has an activation button to allow 30 second upload intervals. This ensures that when programming other components contained in the Area Controller enclosure no erroneous commands are received. The software is also boot loadable allowing for remote upload of updates.
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.