Lumineux 14W LED CCT Bulkhead £12.75!! & Xpelair C4TSR Extractor Fan £24.99


There are no items in your basket
TOTAL £0.00 £0.00
Prices are including vat Prices are excluding vat VIEW CART
BROWSE

REQUEST A QUOTE

Request a Quote

If you need help pricing up your next large project we would love to help! Or maybe you are looking for items not already on our site?, we can source most well-known electrical wholesale brands at competitive prices Please complete the details below and we will respond ASAP

Heatmat PKM-200-0060 Pro-Range Underfloor Heating Mat W: 0.5m x L: 1.2m - Coverage: 0.6m² - 130W 230V 200W/m²

PKM-200-0060

1 in stock for 2-3 day delivery see more info
£50.53 inc Vat
£42.11 ex Vat
Free delivery for orders over £50 ex VAT
The Heatmat PKM-200-0060 is from the Pro-Range of Underfloor Heating Mats W: 0.5m x L: 1.2m - Coverage: 0.6m² - 130W 230V 200W/m²
Description
Technical Specification
The half a metre wide fibreglass mesh has an ultra thin 3mm heating cable pre-spaced and fixed beneath it to help to protect the cable during installation. The heating cable is twin-conductor and 100% aluminium earth shielded so that it emits negligible EMF radiation.

Up to 100% coverage of the free floor area can be achieved as the mat can be cut and turned and the cable can be stripped off to fill in any awkward areas. Heatmat heating mats are fully earth shielded which is a requirement of the 17th Edition IEE wiring Regulations, carbon films are unearthed and therefore require an additional earthing grid to be installed above them to make them safer and compliant with the Regulations.

200W/m² mats offer a rapid warm up time and are suitable for use beneath tile and stone coverings where they can provide primary heating in the vast majority of rooms, including conservatories. When the 200W/m² heating mats are laid onto a wooden base a 2-3mm skim of tile adhesive should be used to cover the base first.

Technical Specification:
General Construction: Dual conductor wire with earth
Voltage: 240 Vac – 50Hz
Maximum Load: 20 W/m
Maximum Cable Temperature: 90 ºC
Approvals: CE marked, BEAB system approved and Semko approved
Wire Thickness: 2.7mm to 3.2mm depending on Ohm Value
Cable Flexibility: Minimum allowable cable radius is 18mm
Power Range: 130W-1973W
Approved in accordance with: EN 60335-1:1998, EN60335-2-17:1999, IEC 60730
IP Rating: IPX7 as required by the 17th Edition IEE Wiring Regulations

Construction:
Thermal Conductor: 2 x resistance wire insulated with Teflon (FEP 7Y) tested to 200ºC
Outer Insulation: PVC (Y) tested to 90ºC
Reinforcement Materials: Fibreglass wire
Reinforcement Mesh: Fibreglass mesh
Fixing Materials: Supplied with rows of double-sided tape
Earth Protection: 100% aluminium earth shield and drain wire

Technical Information
C/w Humidistat N
C/w Pullcord N
Ean Code 5060424142491
Range Heatmat Pro-Range
Coverage 0.6 Square metres
Conductor Twin
Product Underfloor Heating
Type Underfloor Heating Mat
Wattage 130 W
Length 1200 mm
Voltage 230/240 V
Use Domestic
Width 500 mm
Standards BEAB Semko EDA EMF IEE IEC 60730 EN 60335
Qualifier Under Floor
Nominal Power Output 130 Watts (W)/Metre
Ce Approved Y
C/w Cable Y
Delivery

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.

Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.

Reviews

You May Also Need