Heatmat PKM-160-0620 Pro-Range Underfloor Heating Mats W: 0.5m x L: 12.4m - Coverage: 6.2m² - 1040W 230V 160W/m²

Technical Specification
The half a metre wide fibreglass mesh has an ultra thin 3mm heating cable pre-spaced and fixed beneath it to help to protect the cable during installation. The heating cable is twin-conductor and 100% aluminium earth shielded so that it emits negligible EMF radiation.

Up to 100% coverage of the free floor area can be achieved as the mat can be cut and turned and the cable can be stripped off to fill in any awkward areas. Heatmat heating mats are fully earth shielded which is a requirement of the 17th Edition IEE wiring Regulations, carbon films are unearthed and therefore require an additional earthing grid to be installed above them to make them safer and compliant with the Regulations.

160W/m² mats are suitable to provide floor warming beneath tile and stone coverings but in addition can be used beneath carpet, bonded wooden floors and vinyl when used with Thermoplan levelling compound.

Technical Specification:
General Construction: Dual conductor wire with earth
Voltage: 240 Vac – 50Hz
Maximum Load: 20 W/m
Maximum Cable Temperature: 90 ºC
Approvals: CE marked, BEAB system approved and Semko approved
Wire Thickness: 2.7mm to 3.2mm depending on Ohm Value
Cable Flexibility: Minimum allowable cable radius is 18mm
Power Range: 130W-1973W
Approved in accordance with: EN 60335-1:1998, EN60335-2-17:1999, IEC 60730
IP Rating: IPX7 as required by the 17th Edition IEE Wiring Regulations

Construction:
Thermal Conductor: 2 x resistance wire insulated with Teflon (FEP 7Y) tested to 200ºC
Outer Insulation: PVC (Y) tested to 90ºC
Reinforcement Materials: Fibreglass wire
Reinforcement Mesh: Fibreglass mesh
Fixing Materials: Supplied with rows of double-sided tape
Earth Protection: 100% aluminium earth shield and drain wire

C/w Humidistat	N
C/w Pullcord	N
Ean Code	5060424142439
Range	Heatmat Pro-Range
Coverage	6.2 Square metres
C/w Thermostat	Y
Conductor	Twin
Product	Underfloor Heating
Type	Underfloor Heating Mat
Wattage	1040 W
Length	12400 mm
Voltage	230/240 V
Use	Domestic
Width	500 mm
Standards	BEAB
Qualifier	Under Floor
Nominal Power Output	1040 Watts (W)/Metre
Ce Approved	Y
C/w Cable	Y

Delivery Options:

• PRIORITY DELIVERY – Next Working Day (All items in stock and ordered before 3 pm) - £7.08 inc-VAT. (£5.90 ex-VAT)

• Orders Over £100 (before VAT): We offer free standard shipping on all orders shipped to UK mainland addresses

• Orders under £100 (before VAT): Our standard delivery fee to UK mainland addresses is £5.90 ex-VAT (£7.08 inc-VAT)

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12 ex-VAT for all orders (Prices subject to change).

Items requiring specialist shipping:

• Orders containing Solar Panels, Batteries and/or Inverters: Up to 50 qty will be dispatched on a pallet and incur a £120 ex-VAT delivery charge**.

**Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £180 ex-VAT (Prices subject to change).

Contact us if you have any further questions.

>> Go back to FAQs