Hyco Manufacturing HF05LM Handyflow White Plastic Vented Point-Of-Use Oversink Water Heater With Tap & Chrome Spout & Externally Adjustable Thermostat 5Ltrs 2kW
HF05LM
Handyflow oversink vented point of use 5L water heater. Ideal for occasional use light dishwashing at a single kitchen sink in the workplace, for example portable buildings, offices, shops, workshops, garages and other small commercial premises.
Capacity (litres): 5
Power (kW): 2.0
Heat Up TIme (mins)*: 12
Standing Loss (kWh/day): 0.32
* Heat up time from 10°C to 75°C
Outer Casing
Easy clean, high impact plastic
Heating Element
Copper-sheahted type element
Thermostat
Capillary type adjustable to approx. 80°C
E setting approx. 55°C
Water Tank
Polypropylene
Insulation
High density polystyrene CFC free
Spout
Length 10” (250mm)
Safety
Open outlet non-pressurised system, supplied tap and spout must be used.
Safety re-settable thermal cut out. Frost protection setting when power is switched on.
Heating Cycle
It is normal for the spout on this type of unit to drip slightly during the heating cycle, caused by the water expanding as it heats up.
IP Rating
IP24
Installation
Must be sited above a sink using the wall fixing bracket supplied, with the spout and tap located at the bottom of the unit.
Plumbing
Must be installed by a suitably qualified person.
Minimum water pressure 0.3 bar.
Maximum water pressure 8.0 bar.
Water Connection
Inlet valve/tap 1 x 15mm compression.
Outlet 1 x chrome plated brass spray arm.
Fittings required (not supplied): none.
ONLY USE THE FITTINGS SUPPLIED SO THAT THE UNIT IS NOT PRESSURISED.
Electrical Connection
Installation must comply with current IEE regulations.
The product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.
Cable pre-wired (1m).
Approvals
CE
Standard Warranty
1 year parts or replacement warranty.
Range | Hyco Handyflow |
Product | Water Heating |
Type | Unvented Oversink |
Wattage | 2 kW |
Colour | White |
Output | 2 kW |
Capacity | 5 Litres |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.