4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Hager VA4T2SDSPD Design Enclosed Type II Surge Protection With 100A Isolator Switch Height: 187mm - Width: 115mm - Depth: 87.5mm
VA4T2SDSPD
Surge protection devices are designed to protect electronic equipment within an installation from the harmful effects of overvoltages.
The unit is designed to be installed next to the consumer unit or distribution board. The cable provided can be connected to the main switch of the consumer unit or distribution board. The earth conductor (6mm²) is connected into the earth terminal on the surge protection device and the main earthing terminal in the consumer unit or distribution board.
Features
• Protects the installation against transient overvoltages
• End of life indicator on Line cartridge gives indication when replacement is required.
• Ideal when retrofitting surge protection to an installation
• No space required inside existing consumer unit or distribution board.
• Provided with Line and neutral conductors
Technical Specification
Standard: BS EN 61439-3
Rated Operational Voltage: 230V
Rated Frequency: 50 / 60 Hz
Max discharge (lmax) or impulse (limp): 15kA
Nominal disharge current (lm): 5 kA
Voltage protection level up according to IEC 61643-1: 1kV
Voltage continuous operating voltage Uc: 275V
Nominal Tightening Torque: 3.6 Nm
Pollution Degree to IEC 60664 / IEC 60947-2: 2
Protection index IP: IP2X
Working Temperature: -40°C up to 60°C
Storage Temperature: -40°C up to 80°C
Altitude: 2000m
Remote Contact: No
Connection Capacity: 35mm²
Size H x W x D: 80mm x 152mm x 68mm
RoHs: Voluntary Conformity
Warranty: 2 Years
| C/w Link | Y |
| Maximum Working Voltage | 230 V |
| Ean Code | 5015652606703 |
| Range | Hager Design |
| Connection Type | Screw Clamp |
| Product | Surge Protection Device |
| Type | Type 2 |
| Colour | White |
| Length | 187 mm |
| Pole Configuration | Double Pole (2P) |
| Material | Steel |
| Width | 115 mm |
| Depth | 87.5 mm |
| Current Rating | 100A |
| Standards | BSEN61439-3 |
| Number Of Poles | Double Pole (2P) |
| Height | 187 mm |
| Insulated | Part Insulated |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £50 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.