Kewtech KT66DL 12-in-1 Multifunction Tester With EV Testing Capacity

Features:
• User interface: Easy to use single rotary dial with four function softkeys and colour LCD 3.5†dot matrix display.
• ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs. 2 wire only option is very useful in case of no neutral (i.e. 3-phase motor lines & testing at switch points for lighting circuits).
• Loop: High test current range of 2Ohm with 0.001Ohm resolution.
• Zs Limit: Compares the values required by Electrical Installations Standard (BS7671- 18th Edition) with measured results.
• 55V Loop: Low and high current loop test of 110V CTE circuits
• RCD: Type AC, A, F, B (General & Selective), EV and Variable RCDs. Single, auto, ramp and contact voltage options. All auto test results displayed on one screen.
• Earth: Earth resistance test 2 and 3 wires option.
• Insulation: Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
• Continuity: Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
• Phase rotation: On 3-phase lines with clear indication of the sequence on the display.
• Volts: TRMS Voltage measurements 2-600V, Mains Frequency.
• SPD: Surge Protection Device test, for SPD that uses varistor.
• PAT: Portable Appliance Tester function, for insulation and protective conductor resistance test.
• Advanced memory: Assigns type of test (eg: R2 or R1+R2 for continuity), circuit number and DB to test results
• Touch voltage: Selectable
• Documentation: End of line calibration certificate and manual
• Help: Display shows how to connect the instrument according to the function selected.
• Protection: Supplied in heavy duty soft carry case and the instrument has a lid.
• SAFETY: IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557- 1,2,3,4,5,6,7,10

Accessories:
• ACC064SP G7 Test probe with remote test button
• ACC065 G7 Test lead set
• Batteries
• Instruction Manual
• Calibration Certificate
• Software
• Kamp12 Mains lead
• Test lead pouch
• Soft carry case
• USB cable
• Padded strap

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.

Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.