4.8⭐
Cable & Cable Management
Lighting & Lamps
Wiring Accessories
Cable Accessories
Power Distribution
Heat & Vent
Energy Controls
Fire & Security
Tools & Fixings
Test Equipment
Site Equipment
EV Charging
Solar
Heatrae Sadia 95.200.245 Supreme 310SS Stainless Steel Instantaneous Boiling Water Heater With Die-Cast Tap Handle 25Ltrs 3kW
95.200.245
Heatrae Sadia's Supreme 310SS (Order Code: 95.200.245) 25 litre larger capacity instantaneous beverage water heater is available in a stylish fingerprint resistant stainless steel finish. The Supreme is a permanently plumbed, wall-mounted and delivers boiling water for drinks and snacks up to 100 mugs at one time for a busy canteen, community hall or hospital. Intelliboil™ is the key technological advance that sets the Supreme apart from conventional instant water boilers. It's a patented, ultra-efficient hot water management system that effectively controls the boiling cycle for improved efficiency. Intelliboil™ regularly brings the water to boil in response to usage - but if no water is drawn off for over an hour, it reduces the maximum stored water temperature from 100°C to 90°C. This saves electricity until the Supreme is used again - perhaps the next day or after a weekend - at which time the normal boiling cycle automatically resumes. Reflecting our complete confidence in this innovative new technology, we provide every Supreme with a full two year parts and labour guarantee with on-site service support.
• Capacities - 150 cups at one time (100 mugs).
• Rating - 3kW @ 240V. (2.8kW @ 230V) to recover 160 cups* per hour.
• Outer casing - Fingerprint resistant stainless steel with grey ABS mouldings.
• Thermal insulation - CFC/HCFC free (ODP zero) flame-retardant expanded polyurethane.
• Water container - Tin-plated copper, hinged access to element plate.
• Heat unit - Low watt density Superloy element(s) for long life.
• Thermostat - Electronic to control water temperature up to boiling point.
• Safety features
- All models are low pressure vented.
- Dry start protection by self resetting bi-metal thermal cut-out.
- Boil dry by protection by manually resettable disc-type bi-metal cut-out.
• Approvals
- BEAB approved. kiwa approved to UK Water Supply Regulations.
- Manufactured in the UK in a BS EN ISO 9001:2008 registered factory.<
Fixing
Supreme units have a fixing template and hook-on brackets for wall-mounting, ideally over a draining board or drip tray.
Clearance should be allowed above and below the unit for maintenance and either side if additional taps are to be fitted (refer to instructions).
Hinged mounting bracket allows unit to swing forward for ease of service access.
Plumbing
Cold water feed should be taken directly from the mains – min pressure 0.5 bar (7psi) max pressure 10 bar (145psi). Bottom or rear entry is possible using 15mm push-fit connections.
Electrical
Supply (bottom or rear entry). 3kW units can be taken from a suitable ring final circuit via a fused spur but must be via a double-pole linked isolating switch with a minimum break capacity of 13A.
All electrical work must comply with the latest IEE wiring regulations.
| Range | Heatrae Supreme |
| Product | Water Heating |
| Type | Instant Water Boiler |
| Wattage | 3 Kw |
| Colour | Stainless Steel |
| Output | 3 kW |
| Capacity | 25 Litres |
Delivery Costs
Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.
Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.
*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.
Solar Panels, Batteries and Inverters
Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.
**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.
Click here to find out more.