Heatmat PKC-DEC-0100 1m² Decoupling Membrane for Use with Loose Underfloor Heating PKC Cables

Heat Mat's decoupling membrane is designed for use specifically with Heatmat's 3mm PKC range, and is ideally suited for use under tiles. Installation is fast, there is no need to use double-sided tape to secure the cables, the cable will simply slot into place between the studs allowing cables to be quickly and evenly spaced where the heat is required most in the room. Heating cables are usually fitted at an output of approximately 145W/sqm by a 3 stud spacing on the membrane.

Features

•     Quick to install, there is no need for additional fixing materials such as double-sided tape
•     The membrane protects the cables during the installation of floor tiles and trowel work
•     The output can be altered to ensure heat is concentrated in areas that need it the most
•     We recommend planning out the space beforehand to ensure the cable is distributed as required
•     Cut the matting to size to cover the floor area - Decoupling membrane is available in 15m² or 5m² rolls and 1m² panels
•     In bathrooms or wet rooms seal the joins between mats to prevent any water ingress
•     An adhesive should be used to fix the membrane to the floor base
•     Low profile, the decoupling membrane is only 6mm thick

Delivery Costs

Our standard delivery charge to UK mainland addresses is £5.90 ex-VAT.

Take advantage of FREE* Delivery when you spend over £100 (per order) ex-VAT.

*Delivery charges to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes are £12.00 ex-VAT.

Solar Panels, Batteries and Inverters

Due to their size all solar panels, batteries and inverters orders up to 50 qty will be despatched on a pallet and incur a £120** ex-VAT delivery charge.

**£180 ex VAT to JE, GY, TR, BT, IM, IV, HS, KW, ZE and certain PA post codes.

Click here to find out more.